1 CAN FD, 6 LIN to USB – TC1026
SKU : TC1026
TC1026 is a multi channel CAN FD and LIN bus interface device introduced by TOSUN. It supports a maximum CAN FD bus rate of 8 Mbps and LIN support at rates from 0 to 20 Kbps.
Datasheet
UserManual
Related Products
Related products
TC1026 Functions and parameters
The product utilizes a highspeed USB 2.0 interface for connection to a PC, and its Windows plug-and-play design ensures system compatibility.
Combined with the powerful TSMaster software, TC1026 supports the loading of DBC, LDF, and ARXML data base files. This facilitates convenient monitoring, analysis, and simulation of CAN FD/LIN bus data. Additionally, it supports functionalities such as UDS diagnostics, ECU flashing, CCP/XCP calibration, and more.
It is suitable for secondary development with APIs available for both Windows and Linux systems, supporting various programming environments such as C++, C#, LabView, Python, among others. This versatility enables easy integration into diverse testing systems, ensuring high efficiency and usability.
- Automotive-grade design, supports LDF, dbc files, a2l files, blf files, asc files, and arxml files
- Adjustable CAN channel baud rate from 125Kbps to 1Mbps, CAN FD supports up to 8Mbps
- LIN bus master and slave nodes are software configurable
- Supports data logging and offline/online playback in blf and asc formats
- Supports UDS diagnostics and CCP/XCP calibration
- Supports UDS-based Flash Bootloader
- Supports UDS diagnostics over LIN bus
- Supports information security testing
- Supports secondary development interfaces for Windows and Linux systems
- Supports all paid licenses for TSMaster software
LIN 1/2/3
-
PIN1 GND3
-
PIN2 GND2
-
PIN3 GND1
-
PIN4 LIN3
-
PIN5 VBAT _ LIN3
-
PIN6 LIN2
-
PIN7 VBAT _ LIN2
-
PIN8 LIN1
-
PIN9 VBAT LIN1
LIN 4/5/6
-
PIN1 GND6
-
PIN2 GND5
-
PIN3 GND4
-
PIN4 LIN6
-
PIN5 VBAT _ LIN6
-
PIN6 LIN5
-
PIN7 VBAT _ LIN5
-
PIN8 LIN4
-
PIN9 VBAT_LIN4
CAN FD
-
PIN2 CANFD _ Low
-
PIN3 CANFD _ GND
-
PIN5 CANFD _ Shield
-
PIN7 CANFD_High
Typical applications
- Whole vehicle multi channel CAN FD/CAN bus data acquisition
- Domain controller testing
- Various automated testing systems
Specification
| channel | 1 x CAN FD 6 x LIN |
|---|---|
| PC End | High-speed USB 2.0 interface |
| CAN/LIN End | DB9 interface |
| driver | Driver-free design for Windows and Linux systems, ensuring system compatibility |
| Buffer | Each channel supports a transmit buffer of up to 1000 CAN/CAN FD frames |
| CAN | Supports CAN 2.0A, B protocols, compliant with ISO11898-1 standard, with baud rate 125Kbps-1Mbps |
| CAN FD | Supports CAN FD that complies with both ISO and non-ISO standards, with baud rates from 125Kbps to 8Mbps |
| LIN | Support for LIN 1.3 and 2.0, baud rate from 0-20Kbps |
| Schedule Table | Supports LDF files and can run schedule tables; also allows custom schedule table configuration |
| Timestamp | 1μs hardware message timestamp |
| Termination Resistor | Built-in 120-ohm termination resistor, software configurable |
| * | Single channel at 1Mbps with a 0-byte data field |
| Isolation | CAN channel isolated at DC 2500V, with ESD protection of ±4KV (contact discharge) and ±8KV (air discharge) |
| Power Supply | USB powered; external power supply required for LIN communication |
| Casing Material | Aluminum |
| Dimensions | 100 x 80 x 30mm |
| Weight | Approximately 252g (without packaging) / approximately 699g (with packaging) |
| Operating Temperature | -40°C to 80°C |
| Operating Humidity | 10% to 90% relative humidity (non-condensing) |
| Operating Environment | Keep away from corrosive gases |
During operation, make sure to correctly connect the power lines and avoid frequent plugging and unplugging.