TTS1018 – 12 channel CAN FD bus device
TTS1018 is a 12 channel CAN FD bus device launched by TOSUN. It adopts a chassis slide rail installation method, making it easy to integrate into the TOSUN TTS system.
- ARM64 Linux: tsdev
- HarmonyOS: tsdev
Related Products
Related products
TTS1018 Functions and parameters
The CAN FD1 channel is connected to the board card control bus, allowing direct control of boards within the same bus network through the CAN FD1 channel. The CAN FD1 terminal resistor uses the resistor mounted on the TTS0001 slide rail slot, which is not software controlled. Other parameters are the same as the TOSUN TC1018 device.
With the powerful TSMaster software, it supports loading DBC, ARXML, etc. database files, making it very convenient to monitor, analyze, and simulate CAN FD bus data, and it also supports functions such as UDS diagnostics, ECU flashing, CCP/XCP calibration, etc.
- μs (microsecond) level hardware message timestamps to meet advanced requirements
- CAN channel DC 2500V isolation
- CAN channel baud rate adjustable from 125 Kbps to 1 Mbps, and CAN FD supports a maximum of 8 Mbps
- Supports blf and asc format data recording and offline/online playback
- Supports UDS diagnostics and CCP/XCP calibration
- Supports UDS based Bootloader flashing
- Auxiliary communication controller, eliminating the need to add extra nodes during cold starts
- Perfectly adapts to FlexRay, CAN/CAN FD bus applications based on TSMaster
- Supports secondary development interfaces for Windows and Linux systems
Hardware Interface
- Pin 3 CAN_Shield
- Pin 4 CGND
- Pin 5 CAN 2_Low
- Pin 6 CAN 2_High
- Pin 7 CAN 3_Low
- Pin 8 CAN 3_High
- Pin 9 CAN_Shield
- Pin 10 CGND
- Pin 11 CAN 4_Low
- Pin 12 CAN 4_High
- Pin 13 CAN 5_High
- Pin 14 CAN 5_High
- Pin 15 CAN_Shield
- Pin 16 CGND
- Pin 17 CAN 6_Low
- Pin 18 CAN 6_High
- Pin 19 CAN 7_Low
- Pin 20 CAN 7_High
- Pin 21 CGND
- Pin 22 CAN_Shield
- Pin 23 CAN 8_Low
- Pin 24 CAN 8_High
- Pin 25 CAN 9_Low
- Pin 26 CAN 9_High
- Pin 27 CGND
- Pin 28 CAN_Shield
- Pin 29 CAN 10_Low
- Pin 30 CAN 10_High
- Pin 31 CAN 11_Low
- Pin 32 CAN 11_High
- Pin 33 CAN 11_High
- Pin 34 CAN_Shield
- Pin 35 CAN 12_Low
- Pin 36 CAN 12_High
Typical applications
Specification
| Channel | 12 x CAN FD |
|---|---|
| PC Interface | Converted to USB 2.0 via backplane slot |
| Communication Port Interface | SCSI 37 Pin Interface |
| Driver | Driver-free design for Windows and Linux systems, ensuring system compatibility |
| Buffer | Each channel supports a transmit buffer of up to 700 CAN frames |
| CAN | Supports CAN 2.0A, B protocols, compliant with ISO11898-1 standard, with baud rate 125 Kbps to 1 Mbps |
| CAN FD | Supports CAN FD that complies with both ISO and non-ISO standards, with baud rates from 125 Kbps to 8 Mbps |
| Timestamp Accuracy | 1 μs hardware message timestamp |
| Relay Type | Magnetic latching relay |
| * | Single channel at 1 Mbps with a 0 byte data field |
| Isolation | CAN channel DC 2500 V isolation |
| Power Supply | USB power supply |
| Power Consumption | 4.5 W |
| Operating Humidity | 10% to 90% (non-condensing) |
| Operating Environment | keep away from corrosive gases |
During operation, make sure to correctly connect the power lines and avoid frequent plugging and unplugging.